It has been some time since posting on the progress of the new shop. As you can see the Tyvek wrap has been installed over the OSB boards to keep them dry until the siding is put on. The insulation went up quick and with some temporary heat on in the shop has proved to be very effective. The 60 amp sub panel has been installed and lights are going up. I should have plenty of power to run a number of plugs although not many will be needed in a chair shop.
Once the floor is put down I'll be moving in. I have to lay tile for installation of the wood stove. The flooring will be 1/4 sawn white oak that has to be planed and routed for the tung and groove.
After many, many days of thinking how to use the beautiful windows that Carl had given to me I had to break the news to him that I would buy new wood windows. This was a very hard decision but if I were to be able to move in the new shop this year I would not have time to build all the frames for these windows. Insulation factors played a big part too. 
I did get to use Troy and Katie's old front door unit. They only had one side light so I'll have to build one to match. Troy is a good friend of mine who I grew up with here in Hendersonville. He is traveling with his family on a trip around the country for a whole year to live and learn all they can. I look forward when they walk through their old front door again.
It's looking good, Greg!! We look forward to that, too.
ReplyDeleteThanks Troy. The door even sounds the same when it shuts. Close your eyes and you think you are back home.
ReplyDelete