Facelift

Finally, a chance to blog about a few of the many things I have been doing lately. First and foremost I am glad to show the new color of the shop "olive grey" from Porter Paints. I am sure my neigbors are pleased to be rid of the big yellow shop. The Hardie plank siding says to paint within 90 days to prevent voiding the warranty. Oh well, 90 days, 2 years, what's the difference? At least I gott'er done. I also added the front porch roof which gave the best atmosphere inside the shop thus far. I wish I had done this a long time ago. There is still lots of loose ends to tie up but I'm headed in the right direction.

Another project that had been lying around was this monster red oak log someone brought me to cut. (thanks Todd). Wow, the picture does not do it justice but this was the biggest log to date that I have sawn on the mill. 44'' at the base tapering to 36''. I wish this had been butternut.

Last weekend was the TACA craft fair in Nashville. I finished a rocker for the show. I had the chance to use Pete Galbert's method to rout the rocker slots in the legs. The up spiral bit although expensive(and noisey) worked very well.

As you can see below the joint is flawless and cleaner than the ones I use to cut by hand. I made the cut in one pass and the bit did fine. Not bad for hard maple. The chair, which uses a parabola rocker design, was a big hit at the show. People seemed to think that the chair was very comfortable.I received several orders.

Logan has been doing well at guitar practice. His teacher, Kevin at Sam Ash Music, is quite amazing with anything with strings. He has great patience with Logan and has taught him things that I never could. I get to sit through his practices and the biggest key that Kevin pushes is repeating the rif over and over. Logan has learned Sweet Child of Mine, Black Dog, and Stairway to Heaven. I guess my versions of John Denver were not enough for Logan. Anyway, what fun it is.

Berea Bound

Well, we did it. The turnings are done. Below you see Pete Wiens and myself with everything done. Pete did half of the double bobbin legs. Pete is an accomplished turner who just finished a comb back class and decided to help me over this mountain. Thanks Pete!

This is what happens after you have completed over 200 turnings in one week. Your brain decides to do something useless but artisitc. Besides, when will I have so many turnings in one place again.

Everything is ready to go to Berea, Ky. to help with Pete Galbert's class at Kelly Mehler's. This has been great fun turning and splitting chair parts for 26 chairs. I look forward to the 2 classes we are doing and the awesome food Kelly provides. I have said it before, if you haven't been to one of Kelly Mehler's classes you are missing a fantastic opportunity. See everyone in a few weeks!

Oops!

No, this is not my car. I don't even know the people who live here but I bet this guy wished he had parked in the garage. Several weeks ago a severe downburst of straight line winds blew through the Indian Lake area of our town. This shows the power of falling timber. I didn't get to aquire the walnut from this yard but it was very nice. There were more trees than I could ever imagine trying to harvest. I am only one man with limited equipment. I also simply do not have the time to be gathering trees, although.......

With some help from Pete Wiens and Bob Peterson we did manage to gather a few. That's me on the left only wishing I was able to cut the beech tree you see behind us. This tree was near 200 years old and 4 feet across. Pete(far right) wanted a quarter section to turn on his lathe so I tried to cut a piece for him. The tree company people felt sorry for my little 20'' Sthil chainsaw and showed me up with his monster saw which melted through this log without hesitation. He grinned the whole time he was cutting. He knew he had showed me up. I'd like to see him make a chair!

Here is the result from the beech tree. Remember, this is only a quarter of the log.I cannot wait to see how Pete will chuck this on his lathe. Good luck.

Here is a cherry tree I cut up into turning blanks for chair parts. I also sawed a hickory and maple for firewood. The best tree we found was a butternut and of coarse we sawed into seat blanks.

For those of you coming to the chair class at Kelly Mehler's here is Bill Nelson helping me harvest some white oak for your chairs. Bill recently had hip replacement surgery. What was he thinking?

I like being able to select the trees while I can see them standing. We also cut some post and rafters for the front porch of my shop. This will be my next project after returning from Kelly's school mid April.

I like this picture showing all the wood I have been collecting the past month. On the trailor the front porch wood, the chair logs already unloaded on the ground(by the way they split very well), and in the back ground tons of firewood for next winter.

I have had lots of students at the shop during all this and one more class to teach right before I leave for Berea to help Pete Galbert. I finished the last of the turnings tonight and will post some pictures later this week. Time for a nap!

Preparing for Class

Once again I have the honor of assisting Peter Galbert with the chair class at Kelly Mehler's school this spring in Berea Kentucky. We had a great class last year and the responce to this years class prompted Kelly to add another class. So we have 2 weeks and 2 different sets of students. Pete is flying in from New York so I'll be responsible for all the materials. No pressure there, right?

I've aquired a nice oak log for spindles and a nice sugar maple for all the turnings. I sawed the maple into 5 foot lengths and then sliced them up into 8/4 on the sawmill following the grain as close as I could.

Then I brought the 8/4 slabs into the shop and cut to length and ripped into billets on the bandsaw. It's funny how you cut a round tree into squares only to round them up again.I sealed the ends with anchorseal wax to prevent cracks. As you can see below I have a lot of work ahead of me rounding and turning enough stock for about 20 chairs. After rounding the blanks they must dry for several weeks before I can turn the legs, stretchers, and back posts. I'll get some pics of this operation later.

Logan worked on one of his favorite projects of splitting wood. My stove only accepts 12" lengths of firewood so the short sections of red oak blow apart with relative ease. I always seem to have scraps of logs to split up. Nothing goes to waste. You can see the nice stack of wood Logan has already split. Maybe this will get him ready for baseball next season.

I hope by now some of you have tried the laser method of drilling angles. I wanted to show Pete Wiens below drilling a stool leg for box stretchers. With only one of the lasers set up shooting down the center of the leg(hard to see the laser in the photo) it gives you the true center to start drilling. The laser is also set 90 degrees to the bench (checked with a square of coarse) which shoots a beam up the drill so you can drill perfect 90 degrees. I still use the mirror for the the other angle which is easier to see. The stools that Pete Wiens built were drilled so perfect using the lasers that the footprints of each stool matched perfectly. Please let me know if you try the laser method and what you think of its accuracy and simplicity.

Laser Reaming

Sometimes I like to bounce new ideas off of students. Sometimes I get a blank stare or "yea, that's cool", but yesterday after showing Pete Wiens how to drill and ream his stool seat with sight lines and mirrors it hit me that I needed something different. The problem is getting someone who isn't use to looking at sight lines and bevel guages to ream at the proper geometry to get all the legs really close to what they should be. Up til now "really close" was the best I could hope for. All I said to Pete was "what if we had lasers?", and today we have what you see below. With this set up anyone can ream the tapered holes for the legs spot on. It gives the students more confidence than I could ever imagine and it really sets up in seconds. If it were not simple then believe me, I would not fool with it.
It works like this. Go to the local home improvement store and pick up two cheap $15 B&D line lasers. They have a small magnet on the bottom. We built the base out of scrap wood with a heavy hardwood bottom for stability. It's good to have rubber glued under the base so they won't slide around on the bench. The dowel makes it adjustable for easy setup. The laser sits magnetized on a metal nut imbedded in the base.

Now on the bottom of your seat blank after you have drilled the straight holes from above the usual way, draw a perpindicular line across the hole to the sight line. Set up one of the lasers tilted to the drilling angle and sighting down the perpindicular line. The other laser will be adjusted to 90 degrees to the seeat blank and sighting straight down the sight line. Stay with me now.

Now all you have to do is start reaming keeping the crosshair of the lasers right on the top point of the reamer. That's it! It comes out perfect and I have not found a flaw yet.

A couple things to remember. Never look directly into a laser. This set up with this brand of lasers keeps the line of light lower than eye level. Also it helps to turn off the lights above your workbench. I have windows all around and still had no problem seeing the laser lines. Also turn the top of your tapered reamer slightly concave so the laser will fill in to the top of the reamer. I hope this will shead some light on reaming perfect angles. Good luck.

The Next Generation

The other day I picked up my son from the bus stop at the end of the driveway (our driveway is almost half a mile long).After the usual questions about homework and how was his day I could tell something was on his mind. I had recently been working on a small walnut jewelry box for his girlfriend which had to be done right away. To my surprise he told me she broke up with him at school that day. I remeber how that feels and you want to take the hurt away but you can't. At least he hadn't given her that dovetailed jewelry box yet. Boy, 6th grade can be tough!
Let me introduce you to my son Logan. He's eleven (and a half). He is so full of life and loves to tinker with tools in the shop. You can see him below cautiously carving the front of a seat. What you can't see (or hear) are all the questions and comments as he works away. "Dad, why is the wood so rough right here? Dad where can I carve next? Boy this really hurts my arms. How far down do I carve? Can we make a bow and arrow now?" The questions are not much different than the ones my more mature students ask. Watching someone for the first time try to figure out grain direction is cool. It's something I do without thought but first timers go against the fibers every time. It doesn't take long for the wood to tell you what you are doing wrong.
I use to not let Logan pick up sharp tools in the shop but he has really taken an interest with the draw knife, spokeshave, and shave horse. The practice is priceless at his age to learn the nuances of wood. His mind is like a sponge.I wish I had this opportunity 30 years ago.

I guess we haven't done too bad as parents .Logan has such a big heart and strong mind. He is very respectful of his elders and likes to help those who are less fortunate. I would love more than anything for him to follow his old man's footsteps but whatever he does I know it will be great and with that blond hair and blue eyes I'm sure he will find a new home for that jewelry box.

Recently I commented to Pete Galbert about a method to grind the relief on the back of my draw knives. I was using rare earth magnets stuck to my tool rest but the magnets collect the shavings and tend to bind the knife as I work it back and forth on the edge of the slow speed grinder. I now just free hand it on the rest without any sort of fence which works fine. You could clamp a wood fence to the rest and apply paste wax to smooth the operation.I move the blade close enough to hit the back in the center and hollow out enough to aid in honing the back flat. Sorry I don't have a picture of this but it is very similar to Pete's method of sharpening the bevel. You only need to do this once and it's so fast and effective for future honing.

Everything In Its Place

Organization has not always been one of my strengths. If you don't believe me then come check out my pole barn full of un-graded lumber or check out my garage shop after building a case piece. It didn't take me long (after sweeping expensive tools into the burn pile) to come up with the tool cabinet you see below. Modeled after Andy Rae's tool cabinet in "The Toolbox Book" from the Tauntan Press, it holds most of what I use while making chairs.

A quick glance and I know if a tool is missing. Forcing myself into these good habits has been very helpful. It keeps the bench clear as well as my mind. Now that I am getting more established in the new shop I am beginning to hang tools on the walls.

I have also brought my woodworking library and magazines out to the shop and designated a small area for writing, reading, or just deep thought (or a blank stare). This is the first time I have ever had all my magazines in order which can be so nice trying to find a particular article. Hey Pete, I have room for one more book!

Recently I had Sam Hughes from South Carolina come for a two day milk paint class to paint the chair he made in Pete Galbert's class last year. He chose the black over red technique which seems very popular among most. He stayed on the rest of the week and built a shave horse. This is the third class I have taught building the shave horse. Sam did a great job and will return to Kelly Mehler's this spring for another chair class with Pete. I'll be assisting Pete again this year at Kelly's. His school is always a blast.

Seen below is the finished sugar chest that I taught Ron Underwood to make. He was very happy how it turned out and wants to do more pieces in the future. I'm going to miss all those powdered donuts he brought to class everyday. Great job Ron!